Stainless-steel, multi-angle probe folds out for easy positioning in difficult to reach vessels
Fully extended, chemical-resistant probe lengthens unit to 11” (27.9cm)
Unit includes MIN/MAX memory and HOLD key to freeze current display
New flip-to-open design is easy to use. Stainless-steel probe may be positioned at any angle. Fold-up, protected probe permits carrying on the wrist strap or in a pocket. Big-digit, 3/4-inch-high display may be viewed at a glance. Shockproof in drop tests up to 5 feet.
Reading is updated every second
Features include °F/°C switch, minimum and maximum memory readings over any time period, and a HOLD switch freezes the display to capture temperature. Wide range covers 99 percent of routine temperature measurements: –58 to 572°F and –50 to 300°C. Resolution is 0.1° from –20 to 200° (1° outside this range). Ultra™ model accuracy is ±0.3°C at tested points, ±1°C between –20 and 100°C otherwise.
Multi-point calibration on an individually-numbered Traceable® Certificate which assures accuracy from our ISO/IEC 17025:2005 (1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Dimensions are a 0.14 inch stem diameter, 4-1/2-inch stem length, an extended length of 11 inches, 6-inch folded length, width of 5/8-inch and 1-1/2-inch-height. Weight is 2-3/8 ounces. Replacement battery Cat. No. 1105.