Flashing LED indicator and four different alarm configurations for multi-use operation
Thermometer has 4 unique alarms configurations: alarm triggers when temperature is higher than set point, lower than set point, outside of high or low set points or inside higher and low set points allowing precise monitoring of any appliance or experiment
Green/red lights blink and alarm sounds when out-of-range condition is detected
Continuous alarm sounds every minute for 5 seconds until the temperature returns to non-alarm condition or alarm is turned off
Large digits are readable from 10 feet
Probe temperature range is –50.0 to 70.0°C or –58.0 to 158.0°F with a resolution of 0.1° and an accuracy of ±1°C. Ambient temperature range is 0°C to 40°C or 32.0 to 104.0°F with a resolution of 0.1° and an accuracy of ±1°C. Front panel controls make it easy to set.
Multi-point calibration on an individually-numbered Traceable® Certificate which assures accuracy from our ISO/IEC 17025:2017 (1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. High-impact, chemical-resistant ABS plastic case is 3 x 3 x 1/2 inches. Probe size: 0.2-inch dia. x 5/8-inch length, 3-foot cable. Weight is 2-1/4 ounces. Supplied: removable suction cup, stand, self-adhesive wall mount, Traceable® Certificate, and battery. Replacement battery Cat. No. 1105.