Digital Traceable Thermometer *DISCONTINUED*

At the touch of a key, display temperatures from –58.0 to 500.8°F and –50.0 to 260.0°C, switch from °F to °C, or set high/low alarms.

Ideal for all solutions

This is the thermometer to use in foods, soils, cuvettes, water baths, wastewater, and incubators. Resolution is 0.1° and accuracy is ±1°C. Thermometer monitors temperature around the clock. Single battery runs continuously for 1 year. One-half-inch high display is readable from 10 feet. Thermometer automatically monitors solutions. When temperature rises above or falls below set points, a 1-minute audible alarm signals an out-of-range condition. Alarm automatically resets when temperature returns to in-range reading.

When zero is reached, a 1-minute alarm sounds, and display flashes until a key is pressed.

Traceable^® Certificate

Multi-point calibration on an individually-numbered Traceable^® Certificate which assures accuracy from our ISO/IEC 17025:2017 (1750.01) calibration laboratory accredited by A2LA.  It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Probe clips to unit for handy storage. Stainless-steel probe has a diameter of 0.14 inch, a length of 7-1/4 inches, and a cable length of 3 feet. Size is 2 x 4 x 1/2 inches and weight is 3 ounces. Supplied: flip-open stand, probe, AAA battery, and Traceable^® Certificate. Replacement battery Cat. No. 1105.