Includes
Traceable® Certificate, stainless steel probe, stand, hook-and-loop fastener, magnetic strips, wall mount, and batteries.
Key Features
- Accuracy of ±0.05°C within ±2°C of tested points
- Resolution is 0.01°
- Displays date and time of min/max temperature
- High and low settable alarms
- Unit conforms to ITS-90, International Temperature Standard
- °C/°F selectable
- Takes routine measurements at 25.00°C
- Includes NIST-traceable certificate from our A2LA accredited (1750.01) calibration laboratory
- 1 year warranty
More About This Item
Use extreme-accuracy thermometers for measuring temperatures in water baths, cuvettes, gas systems, reagents, standards solutions, ovens, incubators, pharmaceuticals, petroleum products, foods, and wastewater. These digital thermometers provide the exact readings required for critical requirements, quality control checks, and routine measurements. Units read 0.00, 25.00, 37.00, or a combination of all three with a resolution of 0.01° and an accuracy ±0.05°C within ±2°C of standard.
View minimum/maximum and current temperature on the triple-line LCD. MIN/MAX monitors readings overnight, on weekends, or for any time period and displays the exact time and date when the MIN/MAX temperature occurred. Alarm provides two visual (LEDs) and two audio alerts when temperature rises above or falls below high and low set points. Unit displays the exact time and date when dual thermometer alarms are triggered. Alarms are programmable in 0.1° increments. Visual and audible alarms signal continuously (for days) even if temperature returns to nonalarm range. First thermometer ever designed to permit user one-button calibration.
Stainless-steel probe supplied with units shows the slightest temperature change. Use probe with liquids, air/gas, and semisolids. Penetration tip probe measures 1/8” dia x 6-1/4”L with overall length of 9”.
Traceable® Products come with an individually numbered Traceable® Certificate provided with each unit, assuring accuracy from our ISO/IEC 17025:2017 (1750.01) calibration laboratory, accredited by A2LA. The certificate indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMIs) that are signatories to the CIPM Mutual Recognition Agreement. Every Traceable® product undergoes an intense vetting process before it can carry the Traceable name, saving you both time and money by eliminating the need for separate calibration.
Guaranteed to have at least one year of calibration remaining on certificate.
Reviews
There are no reviews yet.